- lalitmago.11@gmail.com
- +91 98115 88648
- 47/B-5, Dabua Ext., Faridabad
- Mon - Sat 9:30 - 18:30
Filtration plants clean all types of dirty oil, removing dirt down to 2 microns through a centrifuge machine fitted with a filter bag, then delivering the filtered oil to your fresh oil tank automatically through transfer pumps. The whole system is controlled from the panel.
Cutting and lubricating oil does not wear out anywhere near as fast as it gets dirty. Fine metallic particles, grinding dust and sludge accumulate until surface finish drops, tools wear faster and the oil gets discarded while still perfectly serviceable.
A filtration plant breaks that cycle. Oil is drawn off, centrifuged through a filter bag down to 2 microns, and pumped back into the fresh oil tank automatically. You keep buying far less oil, and your machines run on cleaner oil than they did when it was new out of the barrel.
Removes dirt down to 2 microns, which is finer than most inline filters on the machine itself achieve.
The whole system is controlled from the panel, so filtration runs without an operator standing over it.
Transfer pumps deliver filtered oil straight to the fresh oil tank, with no drum handling.
Handles all types of dirty oil rather than being tied to one grade or viscosity.
Oil that would have been discarded goes back into service, so purchase volumes drop sharply.
Filter bag access is designed for quick changeover, which is what keeps the plant actually in use.
| Plant type | Oil filtration plant, centrifuge with filter bag |
|---|---|
| Filtration level | Down to 2 microns |
| Suitable for | All types of dirty oil |
| Centrifuge capacity | To be confirmed per model |
| Throughput | Litres per hour — to be confirmed |
| Filter media | Replaceable filter bag |
| Transfer | Pump delivery to fresh oil tank, automatic |
| Pump rating | To be confirmed per model |
| Tank capacity | Dirty and clean side — to be confirmed |
| Control | Fully automatic electrical control panel |
| Body | Fabricated sheet metal with drip containment |
| Filter access | Quick-change filter bag housing |
| Power supply | To be confirmed per model |
| Plant dimensions | To be confirmed per model |
| Customisation | Capacity, pumps and tankage sized to your oil volume |
Recycling cutting and grinding oil across a bank of machines.
Central oil cleaning for high-volume machining lines.
Plants cutting oil purchase and disposal volumes for cost or compliance.
Keeping quench and lubricating oil within specification for longer.
Recovers oil from metal swarf before it ever reaches the drain.
Generates oily wash water that filtration helps you recover from.
Automation and control for the filtration and transfer cycle.
Tell us your oil type, monthly volume and contamination level. We will size a plant and show you what it saves.
