- lalitmago.11@gmail.com
- +91 98115 88648
- 47/B-5, Dabua Ext., Faridabad
- Mon - Sat 9:30 - 18:30
Manual cleaning of large components in quantity is not practical shift after shift. Our washing machines handle the volume with a compact, well-sealed construction and simple operation, and double as an anti-rust spray station that also blows excess oil off the part.
Cleaning is unavoidable in any machining operation, but washing a large quantity of components by hand is slow, inconsistent and hard on the people doing it. Two operators cleaning the same batch will not produce the same result.
A washing machine fixes the process instead of the effort. Nozzle layout, water temperature, chemical concentration and cycle time stay the same every load, so the part that reaches assembly is clean to the same standard every time.
Temperature, chemical dose and cycle time are fixed by the machine, not by whoever is on shift.
The spray and blower stages together remove residual cutting oil, so parts do not arrive greasy at assembly.
An anti-rust dosing stage protects the part through storage and transit after washing.
Stainless steel body and tank stand up to hot water and cleaning chemicals without corroding.
Good sealing keeps spray and steam inside the cabinet instead of on your floor.
The same platform handles small turned parts or large housings, with the fixturing changed to suit.
| Machine type | Component washing machine, spray type |
|---|---|
| Process stages | Wash, anti-rust spray, blower dry |
| Body material | Stainless steel cabinet and tank |
| Tank capacity | To be confirmed per model |
| Heating | Immersion heaters with thermostat control |
| Wash temperature | Set per application — to be confirmed |
| Pump rating | To be confirmed per model |
| Nozzle layout | Designed around your component and blind holes |
| Drying | Blower stage for oil and moisture removal |
| Loading | Basket, tray, rotating table or conveyor |
| Batch size | Parts per cycle — to be confirmed |
| Automation | Control panel with stage timers and temperature control |
| Power supply | To be confirmed per model |
| Machine dimensions | To be confirmed per model |
| Customisation | Tank, nozzles, stages and cycle built to your part |
Pre-assembly washing of machined housings, shafts and gears.
Removing scale, quench residue and oil before the next operation.
Work supplied against a documented milligram-per-part cleanliness limit.
The last station before parts enter a clean assembly area.
Cleans the bins and trolleys those components are stored and moved in.
Keeps the oil you recover from washing clean and reusable.
The upstream step — removes burrs before the part is washed.
Send your component drawing and the cleanliness level you need to hit. We will design the nozzle layout and cycle around it.
